find out other devices mac address using terminal emulator

The t opology consists of one switch and one host using only Ethernet and console ports. You will also demonstrat e the use of a management IP address for remote switch management. These basic switch settings includ e device name, interface description, local password s, message of the day (MOTD) banner, IP addressing, and static MAC address. You will examine default switch configurations before configuring basic switch settings. In this lab, you will build a simple topology using Ethernet LAN cabling and access a Cisco switch using the console and remote access methods.

If the VLAN 1 SVI is assigned an IP address, by default all ports in VLAN 1 have access to the SVI IP address. The SVI, or management address, can be used for remote access to the switch to display or configure settings. List the show mac address-table command options.Ĭisco switches can be configured with a special IP address known as the switch virtual interface (SVI).Determine the MAC addresses that the switch has learned.Test remote management capabilities with Telnet.

Test end-to-end connectivity with ping.Part 3: Verify and Test Network Connectivity Part 2: Configure Basic Network Device Settings Part 1: Cable the Network and Verify the Default Switch Configuration

Find out other devices mac address using terminal emulator